Reported Concern: Washer in Gaur City 2 displayed water filling delay error (IE / 4E) as water trickled slowly.
Technician Inspection: High TDS borewell water in Greater Noida West had deposited thick scale on inlet valve filter mesh.
Repair Work Completed: Descaled filter chamber with safe solution and replaced stiffened solenoid valve plunger.
Parts: ₹550 (Inlet Solenoid Assembly)
•
Labour: ₹350 (Descaling & Fitting)
•
Total Estimate: ₹900
Drum filled with normal water flow, cutting wash cycle time by 20 minutes.
Reported Concern: Motor turned underneath, but centre pulsator plate failed to spin clothes inside wash tub.
Technician Inspection: Plastic gear teeth inside pulsator hub had worn smooth after years of heavy laundry loads.
Repair Work Completed: Fitted a model-matched pulsator disc with fresh brass drive spline insert.
Parts: ₹750 (Replacement Pulsator Disc)
•
Labour: ₹350 (Disassembly & Testing)
•
Total Estimate: ₹1,100
Strong water swirl motion restored, washing linen and clothes thoroughly.
Reported Concern: Water failed to drain out in Supertech Eco Village flat, keeping door locked at wash end.
Technician Inspection: Small sock and lint had wrapped tightly around the magnetic drain pump impeller shaft.
Repair Work Completed: Drained water manually through emergency drain hose, removed debris, and cleaned pump chamber.
Parts: ₹0 (Impeller Unclogging)
•
Labour: ₹400 (Drain Servicing)
•
Total Estimate: ₹400
Pump cleared rinse water rapidly and door lock opened automatically when cycle finished.
Reported Concern: Washer hesitated, shook back and forth 3 times, then threw motor alignment fault code on display.
Technician Inspection: Motor rotor rotation sensor had developed intermittent solder crack on sensor board.
Repair Work Completed: Replaced the rotation sensor module behind stator coils and tightened rotor centre nut.
Parts: ₹650 (Hall Position Sensor)
•
Labour: ₹550 (Rotor Disassembly)
•
Total Estimate: ₹1,200
Direct drive motor accelerated smoothly through all spin speeds without hesitation.
Reported Concern: Spin timer knob turned freely without ticking or turning on the dryer motor.
Technician Inspection: Internal spring inside the 5-minute mechanical timer had snapped from heavy turning.
Repair Work Completed: Fitted a 3-wire compatible mechanical spin timer switch and insulated wiring harness.
Parts: ₹280 (Mechanical Timer Switch)
•
Labour: ₹320 (Console Opening & Wiring)
•
Total Estimate: ₹600
Dryer timer knob turned firmly with accurate countdown and bell chime.
Reported Concern: Water kept filling continuously without starting wash agitation, causing tub to overflow.
Technician Inspection: Transparent air pressure hose had slipped off the water level sensor due to machine vibration.
Repair Work Completed: Reattached pressure tube, secured with steel spring clamp, and verified water level pressure cut.
Parts: ₹50 (Spring Clamp)
•
Labour: ₹350 (Diagnosis & Reattachment)
•
Total Estimate: ₹400
Water stopped filling at selected medium level and wash cycle started immediately.