Reported Concern: Washer in Gaur City 2 took 25 minutes to fill water, flashing 4C error on display.
Technician Inspection: High TDS borewell water had formed mineral crust inside inlet valve solenoid.
Repair Work Completed: Cleaned intake chamber, descaled filter screen, and verified full water flow.
Parts: ₹0 (Descaling & Tuning)
•
Labour: ₹350 (Inlet Servicing)
•
Total Estimate: ₹350
Water filled rapidly and wash program finished on scheduled time.
Reported Concern: Motor turned underneath in Techzone 4, but center Wobble pulsator disc stayed still.
Technician Inspection: Plastic gear teeth inside pulsator centre bush had worn smooth from heavy use.
Repair Work Completed: Installed a brand-compatible Wobble pulsator disc with fresh brass drive spline insert.
Parts: ₹750 (Pulsator Disc)
•
Labour: ₹350 (Disassembly & Testing)
•
Total Estimate: ₹1,100
Pulsator generated strong water currents, washing clothes thoroughly.
Reported Concern: Washer stopped before spin in Sector 16B with water remaining inside drum.
Technician Inspection: Lint and coin had wrapped around drain pump impeller shaft, preventing rotation.
Repair Work Completed: Drained water through emergency tube, cleared pump housing, and verified rotation.
Parts: ₹0 (Pump Unclogging)
•
Labour: ₹400 (Drain Servicing)
•
Total Estimate: ₹400
Drain pump emptied tub in under 90 seconds and spin cycle finished cleanly.
Reported Concern: Washer pulsed back and forth 3 times then threw motor error code in Alpha 2.
Technician Inspection: Motor rotor position sensor had developed intermittent solder crack on sensor board.
Repair Work Completed: Replaced the rotation sensor module behind stator coils and tightened rotor center nut.
Parts: ₹650 (Hall Position Sensor)
•
Labour: ₹550 (Motor Servicing)
•
Total Estimate: ₹1,200
Direct drive motor turned smoothly through all agitation and spin cycles.
Reported Concern: Spin tub timer dial turned freely without turning on the dryer motor in Beta 1.
Technician Inspection: Internal mechanical spring inside timer dial had snapped from heavy turning.
Repair Work Completed: Fitted a 3-wire compatible mechanical spin timer switch and insulated wiring harness.
Parts: ₹280 (Timer Switch)
•
Labour: ₹320 (Console Opening & Wiring)
•
Total Estimate: ₹600
Dryer timer turned firmly with crisp ticking and accurate countdown.
Reported Concern: Water kept filling without starting wash agitation in Delta 1, overflowing tub.
Technician Inspection: Air pressure tube had slipped off water level sensor due to vibration.
Repair Work Completed: Reattached pressure tube, secured with steel clamp, and tested cutoff level.
Parts: ₹50 (Spring Clamp)
•
Labour: ₹350 (Diagnosis & Reattachment)
•
Total Estimate: ₹400
Water stopped filling at selected medium level and wash cycle started immediately.