Reported Concern: Built-in hob burners in Gaur City 2 produced very low flame, taking 25 minutes to boil a kettle of water.
Technician Inspection: Previous occupant used cylinder LPG jets (0.7mm), which starved gas on low-pressure PNG grid.
Repair Work Completed: Fitted calibrated 1.25mm PNG brass nozzles across all burners and adjusted air shutters.
Parts: ₹300 (Set of PNG Brass Nozzles)
•
Labour: ₹400 (Conversion & Tuning)
•
Total Estimate: ₹700
Vigorous roaring blue flame produced on all burners with rapid cooking performance.
Reported Concern: Spark failed to jump across burner in Techzone 4; clicking sound came from underneath counter.
Technician Inspection: Ceramic insulator sleeve on the spark electrode had cracked, causing high-voltage spark to ground to chassis.
Repair Work Completed: Fitted replacement high-temperature ceramic spark igniter pin and silicone high-voltage wire.
Parts: ₹220 (Ceramic Spark Electrode)
•
Labour: ₹350 (Hob Disassembly & Fitting)
•
Total Estimate: ₹570
Spark jumped directly to burner cap ring, igniting gas on the first click.
Reported Concern: Cooktop burner in Sector 16B extinguished immediately when knob was released after 15 seconds.
Technician Inspection: Hard carbon deposit insulated the thermocouple sensor tip from flame heat.
Repair Work Completed: Polished thermocouple probe, cleaned solenoid holding valve, and checked ground continuity.
Parts: ₹0 (Sensor Cleaning)
•
Labour: ₹350 (Safety System Servicing)
•
Total Estimate: ₹350
Burner stayed lit within 3 seconds of knob ignition; safety shutoff tested 100% operational.
Reported Concern: Gas stove in Alpha 2 produced tall yellow flames and heavy soot on frying pans.
Technician Inspection: Rough wire cleaning had enlarged the soft brass jet hole beyond factory size.
Repair Work Completed: Fitted OEM-sized brass injectors and adjusted primary air mixture collar.
Parts: ₹250 (Calibrated Brass Jets)
•
Labour: ₹350 (Flame Tuning & Check)
•
Total Estimate: ₹600
Pure blue flame restored with zero smoke or soot formation.
Reported Concern: Rotary gas knob in Beta 1 remained pushed in, keeping the electric spark igniter firing continuously.
Technician Inspection: Internal return spring on the valve spindle had rusted from liquid spill seepage.
Repair Work Completed: Dismantled valve stem, installed stainless steel return spring, and packed with silicone grease.
Parts: ₹120 (Stainless Return Spring)
•
Labour: ₹380 (Valve Servicing)
•
Total Estimate: ₹500
Knob pops out smoothly upon release, disengaging ignition switch instantly.
Reported Concern: Heavy iron tawa tipped over on Delta 1 cooktop due to uneven pan support feet.
Technician Inspection: Two high-temperature silicone rubber cushion grommets had fallen out during deep cleaning.
Repair Work Completed: Installed genuine heat-resistant silicone feet grommets and checked level plane.
Parts: ₹150 (Set of Silicone Feet)
•
Labour: ₹250 (Levelling & Inspection)
•
Total Estimate: ₹400
Pan supports sat rock-solid on toughened glass surface with zero wobble.